CID patch to allow maps from any SD

1. Make sure you have installed the latest version of the toolbox from here: https://github.com/olli991/mib-std2-pq-zr-toolbox.

:::info Details about Technisat MIB STD2 Toolbox installation.

:::

1. Make sure that Toolbox SD card is inserted into SD1 port. It's required for original file backup before patching.
2. Press and hold MENU button for 10 seconds to enter Testmode menue.
3. Go to Green Engineering Menu → mibstd2_toolbox → customization → navi → Patch navigation config.
4. Reboot the unit with button combination.
5. After the system reboots you can safely remove Toolbox SD card and insert 3rd party SD card or USB drive with navigation database.
6. Press NAVI button and check if the 3rd party card or USB drive is detected as valid navigation database source.

https://www.youtube.com/watch?v=ZOf-XEYhFbQ